Beta — site is under development, information may contain errors. Read disclaimer
Zoning Guide

Simpsonville Zoning & Land Use Guide

Data-only stub — facts unverified locally. Confirm with the planning department before relying on details.
Last updated: Verified:

What we have on file vs. what to verify locally

We don't have editor-verified zoning prose for Simpsonvilleyet. Here's the structured data we do have, and the highest-leverage steps to confirm specifics for your parcel.

What we have on file

Population:
23,200
County:
Greenville County
State building code:
SC Building Codes Council adopts IBC (2018 edition)(statewide default)
State ADU law:
No statewide override; local rules apply
FEMA flood map:
Search flood zones
Planning department:
City of Simpsonville Planning Department
Zoning map:
View city zoning map

Verify these locally

  • Call the City of Simpsonville Planning Department: (864) 967-9526
  • Use the city zoning map to look up your parcel's zoning designation before applying for a permit.
  • Check FEMA flood zone for your parcel — flood-zone status changes setbacks, foundation requirements, and insurance.
  • Check your HOA CC&Rs and recorded deed restrictions — they are common in Simpsonville and frequently restrict ADUs, fences, and exterior changes beyond what zoning allows.

Key Zoning Facts

Planning Department
City of Simpsonville Planning Department(864) 967-9526
Building Code Edition
SC Building Codes (IBC/IRC based)
ADUs Allowed
No

Simpsonville Zoning Overview

Simpsonville is a city of approximately 23,200 residents in Greenville County, South Carolina. The city manages land use and development through its local zoning ordinance, which divides the municipality into residential, commercial, and industrial districts with specific development standards for each.

Simpsonville's zoning framework includes large-lot single-family zones (R-20, 20,000 sq ft minimum), standard single-family zones (R-10, 10,000 sq ft minimum), multi-family districts (R-MF), neighborhood and general commercial districts (C-1, C-2), and industrial zones (I).

Key Zoning Districts

The R-20 district requires minimum 20,000 sq ft lots with 30-foot front setbacks, 8-foot side setbacks, and 25-foot rear setbacks. The R-10 district allows 10,000 sq ft lots with 25-foot front, 5-foot side, and 20-foot rear setbacks. Both districts have a 35-foot maximum building height. The R-MF multi-family district accommodates apartments and higher-density housing.

ADU Regulations

ADU (Accessory Dwelling Unit) regulations have not been confirmed for Simpsonville. South Carolina does not have a statewide ADU mandate, so ADU policies are determined at the local level. Contact the Simpsonville Planning Department to verify whether ADUs are currently permitted and what requirements may apply.

Development Process

Development in Simpsonville generally requires obtaining the appropriate permits from the city's planning and building departments. The process typically involves:

  1. Zoning Verification -- Confirm that your proposed use is permitted in the applicable zoning district
  2. Site Plan Review -- For commercial and multi-family projects, submit a site plan for review
  3. Building Permit -- Apply for a building permit with construction documents
  4. Inspections -- Schedule required inspections during construction
  5. Certificate of Occupancy -- Obtain final approval before occupying the structure

For projects that do not conform to existing zoning, property owners may need to seek a variance, special exception, or rezoning through the local board of zoning appeals or planning commission.

Key Considerations

Before starting any development project in Simpsonville, property owners should:

  • Verify the zoning classification of their property
  • Review setback, height, and lot coverage requirements
  • Check for any overlay districts or special regulations
  • Determine if the property is in a flood zone using FEMA's flood map service
  • Confirm whether HOA covenants or deed restrictions apply
  • Contact the planning department at (864) 967-9526 for pre-application guidance

Disclaimer: This guide provides general information about zoning in Simpsonville and should not be relied upon as legal advice. Zoning codes are subject to change. Always verify current regulations with the Simpsonville Planning Department or municipal code before making development decisions.

Regulatory Layers That Apply in Simpsonville

Your property is subject to ALL of these regulatory layers. Each one can impose additional requirements beyond the others.

Federal

State — South Carolina

  • Building Code: SC Building Codes Council (IBC/IRC based)
View South Carolina zoning overview

County — Greenville County

    City / Municipal

    The city's zoning ordinance, building codes, and local permits form the primary layer of land-use regulation for your property.

    Overlay Districts

    No overlay districts identified.

    Private Restrictions

    • HOA / CC&Rs common: Yes
    • Check HOA CC&Rs and deed restrictions for additional requirements.

    Statewide Context (South Carolina)

    Local data for Simpsonville is limited. The following state-level facts apply across South Carolina and are inherited by this page until city-specific details are verified.

    State Building Code
    SC Building Codes Council adopts IBC (2018 edition)
    State ADU Preemption
    No statewide override
    Coastal Zone
    Yes
    Wildfire Zones
    No

    Permit Costs & Timelines

    Permit Costs & Timelines

    Specific permit fee schedules for Simpsonville are available from the local planning department. Fees vary based on project type, scope, and valuation.

    Check Simpsonville permit fees →

    Official Sources

    City-specific

    City of Simpsonvillesimpsonville.comOfficial source