Green Bay Zoning Overview

Green Bay is a city in Wisconsin with approximately 107,395 residents, located in Brown County. The city manages land use and development through its local zoning ordinance, which divides the municipality into districts regulating permitted uses, building heights, lot sizes, setbacks, and density.

Wisconsin has a statewide building code framework. Residential construction is governed by the Uniform Dwelling Code (SPS 320-325), and commercial construction follows the Commercial Building Code (SPS 361-366). Local jurisdictions enforce these codes and may adopt additional requirements.

Primary Zoning Districts

Green Bay's zoning code includes several district classifications (R-1, R-2, R-3, B-1, B-2, B-3, M-1, M-2). The R-1 (Single-Family Residential) district requires a minimum lot size of 7,200 sq ft with setbacks of 25 ft (front), 6 ft (side), and 25 ft (rear). Maximum height is 35 ft. The R-2 (Two-Family Residential) district requires a minimum lot size of 6,000 sq ft with setbacks of 25 ft (front), 6 ft (side), and 20 ft (rear). Maximum height is 35 ft. The R-3 (Multi-Family Residential) district has varying lot size requirements with setbacks of 25 ft (front), 6 ft (side), and 20 ft (rear). Maximum height is 45 ft. The B-1 (Neighborhood Business) district has varying lot size requirements with setbacks of 10 ft (front), 0-10 ft (side), and 10 ft (rear). Maximum height is 35 ft. The B-2 (Community Business) district has varying lot size requirements with setbacks of 0 ft (front), 0 ft (side), and 10 ft (rear). Maximum height is 45 ft. The B-3 (Central Business) district has varying lot size requirements with setbacks of 0 ft (front), 0 ft (side), and 0 ft (rear). Maximum height is 60 ft. The M-1 (Light Industrial) district has varying lot size requirements with setbacks of 20 ft (front), 10 ft (side), and 15 ft (rear). Maximum height is 50 ft. The M-2 (Heavy Industrial) district has varying lot size requirements with setbacks of 25 ft (front), 10 ft (side), and 20 ft (rear). Maximum height is 60 ft.

ADU (Accessory Dwelling Unit) Rules

Green Bay does not have specific ADU provisions confirmed. Contact the Planning Department for current regulations. Wisconsin does not have a statewide ADU mandate.

Development Process

Development in Green Bay generally requires obtaining the appropriate permits from the city's planning and building departments. The process typically involves:

1. Zoning Verification — Confirm that your proposed use is permitted in the applicable zoning district
2. Site Plan Review — For commercial and multi-family projects, submit a site plan for review
3. Building Permit — Apply for a building permit with construction documents
4. Inspections — Schedule required inspections during construction
5. Certificate of Occupancy — Obtain final approval before occupying the structure

For projects that do not conform to existing zoning, property owners may need to seek a variance, special exception, or rezoning through the local board of zoning appeals or planning commission.

Key Considerations

Before starting any development project in Green Bay, property owners should:

• Verify the zoning classification of their property
• Review setback, height, and lot coverage requirements for their specific district
• Check for any overlay districts or special regulations
• Determine if the property is in a flood zone using FEMA's flood map service
• Confirm whether HOA covenants or deed restrictions apply
• Contact the Planning Department at (920) 448-3400 for pre-application guidance

Disclaimer: This guide provides general information about zoning in Green Bay and should not be relied upon as legal advice. Zoning codes are subject to change. Always verify current regulations with the City of Green Bay or the municipal code before making development decisions.